Helmet kit installation instructions:
If you purchased our standard 3 or 4 conductor helmet kit (3 piece kit,) below are the wiring instructions. *Photos coming soon*
On the earpiece connector (Green wire and black wire) - Connect the green to the blue wire on the harness cable and the black wire to the white wire on the harness cable. The remaining two wires on the harness cable go to the mic which does not matter on polarity.
To summarize: Green to Blue | White to Black | microphone wires are neutral and can be connected either way
If you purchased our helmet pod system there are only 2 wires. Those 2 wires go directly to the mic and once again, it does not matter which way they are connected.
Our sales and support team are available Mon-Fri 8-5est to help with any issues you may be having while installing our kits.
